Description
Boshart FS13U120PB Series Pump Up Float (Pump) Switches are used to turn a pump on with liquid level falling, the contacts are normally closed (NC) for filling tank applications. Contacts are closed while the switch is hanging down and will open on a rising liquid level. This product can be used for a variety of applications, including but not limited to, cisterns, water tanks, and any other filling or low liquid level alarm applications. These float switches are wide angle, mechanically operated, and the contacts are opened / closed by a ball inside the float housing. All switches are supplied with a 120VAC piggyback plug in several cable lengths. Suitable for applications up to 1/2 HP with fluid temperatures up to 140° F (60°C). NOTE: Pump switches are not to be used as control / sensor switches directly wired into a control panel.
Design
Pump Up
Housing
Polypropylene
Voltage
120 VAC
Temperature Range
0°F to 140°F (-18°C to 60°C)
Single Phase Electrical Rating
1/2HP/120V/13AMP
Product Model Short Description
Float Switches
Cord Length
10.00 FEET